---
title: "Process Segments | Cannot set the process segment (User has insufficient rights for equipment mode class.)"
id: "cannot-set-the-process-segment-user-has-insufficient-rights-for-equipment-mode-class-3-0"
project: "Knowledge Base"
url: "https://docs.sepasoft.com/articles/knowledge-base/cannot-set-the-process-segment-user-has-insufficient-rights-for-equipment-mode-class-3-0"
updated: 2026-07-23T18:08:33Z
---

# Process Segments \| Cannot set the process segment \(User has insufficient rights for equipment mode class\.\)

### Getting Error: Cannot Set the Process Segment

You upgraded to 3.81.x
When trying to change a Material Definition, you get this message

Cannot set the process segment (User has insufficient rights for equipment mode class.)
![](/resources/Storage/knowledge-base/cannot-set-the-process-segment-user-has-insufficient-rights-for-equipment-mode-class-3-0/image2020-6-18_6-44-31.png)
### Applies To and Version Info

Platform 3.0

## Details

Check the Mode (for that Equipment via the Equipment Manager 
then Edit

![](/resources/Storage/knowledge-base/cannot-set-the-process-segment-user-has-insufficient-rights-for-equipment-mode-class-3-0/image2020-6-18_7-8-2.png) 
 to show

![](/resources/Storage/knowledge-base/cannot-set-the-process-segment-user-has-insufficient-rights-for-equipment-mode-class-3-0/image2020-6-18_7-8-55.png)

## References

The references to the Sepasoft user manual if any. Please don't forget to add link to the corresponding reference pages.

[MES Equipment Manager](/articles/user-manual/mes-equipment-manager)

## Keywords

Configuration, Run-control-and-Monitoring, Equipment-Manager, Material-Management, Equipment-State, Mode