---
title: "Preparing before Configuring MES Enterprise Network"
id: "preparing-before-configuring-mes-enterprise-network"
project: "MES User Manual"
url: "https://docs.sepasoft.com/articles/user-manual/preparing-before-configuring-mes-enterprise-network"
updated: 2026-09-30T21:11:07Z
---

# Preparing before Configuring MES Enterprise Network

**Sepasoft MES Module Suite**

### Preparing before Configuring MES Enterprise Network

**Considerations before Configuring**

* **[MES Server Sizing & Architecture Guide](/resources/Storage/user-manual/MES%2BServer%2BSizing%2Band%2BArchitecture%2BGuide%2BV5.pdf) -** This guide provides some best practices for implementing a performant and scalable MES solution.

* **Module Versions**

To take advantage of the data recovery and self-healing features of the Sepasoft MES Enterprise network,  the communication protocol that is installed on each server (within the Production module of the Sepasoft MES Suite) needs to be **up-to-date** and on the **same version number** **. Upgrade First**

Version Specific

| ![Warning](/resources/Storage/user-manual/Warning.png) | **3.81.9 RC2** **and later** for MES Enterprise Network data recovery and self-healing features. |
| --- | --- |

**Reference this Knowledge Base article** to understand how different module versions can be used together within a Sepasoft MES Enterprise network:

[Knowledge Base Article: The Sepasoft MES Enterprise Synchronization Protocol](/articles/knowledge-base/sepasoft-mes-enterprise-synchronization-protocol "Knowledge Base Article: The Sepasoft MES Enterprise Synchronization Protocol")

**Verify the Sepasoft MES Module versions.**

* In Ignition 8.3, go to **Platform &gt; System &gt; Modules**.
* In Ignition 8.1, go to **Gateway &gt; Modules**.
* **Access**
    * Ensure all gateways are visible by their parent AND the Enterprise Root (these may be the same GW). For best results all gateways should have a GAN connection to their parent.

Inductive Automation Ignition Specific

| ![Information](/resources/Storage/user-manual/Info.png) | See **Setting Up GAN on the Inductive Automation Ignition website** for setup details. |
| --- | --- |

* * The root server cannot add equipment in MES Enterprise Settings &gt; Hierarchy &gt; Equipment. Root server manages any gateways that are not owned by another gateway server. For example if another gateway doesn't 'take' site 1, root gateway manages site 1. Additionally, you cannot lock which gateways can 'take' Site 1 currently.
* **Redundancy**

If redundancy is enabled, gateways also need connections to the redundant backup.

**Data Sync in MES Enterprise Network**

Equipment can be synced up from Site Servers and synced down from an Enterprise Root Server. Data metrics are provided in the Tag Browser under MES Metrics and within the MES Monitor component. Data retention policies are set within the advanced settings.

Equipment, analysis data, and MES objects each follow different rules for which gateway receives them. For Work Orders, see [Work Order Enterprise Synchronization](/articles/user-manual/work-order-enterprise-synchronization).

**Sepasoft MES Module Suite**