---
title: "Production Simulator"
id: "production-simulator"
project: "MES User Manual"
url: "https://docs.sepasoft.com/articles/user-manual/production-simulator"
updated: 2026-07-31T14:55:54Z
---

# Production Simulator

**Sepasoft MES Module Suite**
 
## Programmable Device Simulator
 This device can be configured with a user-defined hierarchy of static or function-driven values.

### Adding a Production Simulator for a Batch Procedure Recipe 

This is an example of an equipment simulator for a Batch Recipe.

* In the **Ignition Gateway**, go to **Config &gt; OPC UA &gt; Device Connections**.
* Click **Create new Device**.
* Scroll down and select **Programmable Device Simulator**.
* Configure the device simulator:

![](/resources/Storage/user-manual/production-simulator/production-simulator-2024-04-26.png)

**Enabled:** Sets the simulator as active and running.

**Repeat Program:** Select to loop the program.

**Base Rate (ms):** Sets the frequency in milliseconds.

![](/resources/Storage/user-manual/production-simulator/production-simulator-2024-04-26-1.png)

**Edit Button:** Allows editing of the main configuration.

**More:** The edit program option provides a list of simulator program options: SLC Program, Generic Program, Dairy Simulator and Load from CSV.

This examples shows the Load from CSV option.

[Here's the CSV file used in this example.](/resources/Storage/user-manual/equipment_device "equipment device")

* Select a **CSV file &gt; Load Program**.

Example of a CSV file, shown in notepad, used to simulate a batch process:

![](/resources/Storage/user-manual/production-simulator/production-simulator-2024-04-26-2.png)

Example of CSV file loaded in the simulator:

![](/resources/Storage/user-manual/production-simulator/production-simulator-2024-04-26-3.png)

* **Save Program** (at the bottom of that page) starts the program running.

![](/resources/Storage/user-manual/production-simulator/production-simulator-2024-04-26-4.png)

* In **Ignition Designer &gt; Tag Browser &gt; System**, under the Devices folder, the AZ1 device is running.

![](/resources/Storage/user-manual/production-simulator/production-simulator-2024-04-26-5.png)
 This setup could be used to simulate the equipment PLC is a batch system using the Batch Procedure module.
 
**Sepasoft MES Module Suite**