Sepasoft MES Module Suite
Hold Command
A hold command can be initiated by the system when requirements are not met during execution. A hold command can be done manually from the Batch Controller, Batch List, or via scripting with system.mes.batch.queue.executeStepCommand.
MES Enterprise Network
|
The root gateway server within an MES Enterprise Gateway Network can initiate batch commands on child gateway servers. For more info, see MES Enterprise Network. |
Propegate_Hold_To_Parent Parameter
|
Propegate_Hold_To_Parent is set to True to force the parent element to hold if the current phase is put into hold. The hold command propagates up to the parent element which can be an Operation, Unit Procedure or Phase. |
Sepasoft MES Module Suite