Track and Trace Configuration

Sepasoft MES Module Suite

Setting Up for Tracking and Tracing

This section includes the required steps to configuring the Track and Trace Module.

• Modeling the Material Flow
• Modeling your Manufacturing Process
• Configuring Lot Handling
• Creating Material Classes and Definitions
• Creating Process Segments
• Creating Personnel Resources
• Operations Definition Settings

Step 1: Model the Material Flow

Visually laying out the material lots, classes, processes and touchpoints with other information systems is the first step in building a Track & Trace solution. Once this is done, you can rapidly build the production model, classes, definitions and process segments that you'll need.

• Modeling the Material Flow

Step 2: Model fixed equipment (lines and cells) and storage locations (storage zones and units).

Fixed Equipment and Storage Locations are configured in the Production Model in the Designer.

• Modeling your Manufacturing Process
  

Step 3: Configure Fixed Equipment Lot Handling Modes

Define how material is stored at fixed equipment i.e. Blended, FIFO, Single lot etc.

• Understanding Lot Handling Methods

Step 4: Create Equipment Classes

•   Understanding Equipment Objects

Step 5: Create Supplemental Equipment

•   Understanding Equipment Objects

Step 6: Create Material Classes and Definitions

Step 7: Create Personnel Classes and Definitions

• Creating Personnel Resources

Step 8: Create Operations, Process Segments and Routes

• Understanding Operation Configuration
• Operations Definition Settings
• Creating Process Segments

The Tutorials provide step by step instruction on configuring equipment, materials and operations.

Sepasoft MES Module Suite